1. What is the definition of a fitting
2.What is the definition of a combination fitting
3. How do you determine the degree of a bend write the formula below with an example.
4.What type of fitting allows you to put 2 different types of pipes together
5.What is the minimum pipe diameter before manholes are required.
6. Define the following:
Building sewer
Building drain
Soil stack
Add Comment
Devices used to connect pipe
2.What is the definition of a combination fitting
A combination of 2 types of fittings
3. How do you determine the degree of a bend write the formula below with an example.
Multiply bend by 360 twice, ¼ x 360 = .025 x 360 = 90 degrees
4.What type of fitting allows you to put 2 different types of pipes together
Combination fitting
5.What is the minimum pipe diameter before manholes are required.
8 inches
6. Define the following:
Building sewer – is a drainage piping that runs from the buildings foundation to the sewer main or septic tank
Building drain – the main horizontal pipe inside a building that carries all sewage and other liquid wastes to the building sewer
Soil stack – Vertical section of pipe that receives the discharge of water closets, with or without the discharge from other fixtures
Description:
Read pages 15.14-15.25 sections 7.00-13.00 and answer the following questions.
1. What is the definition of a fitting
fittings are devices that are used to connect pipe.
2.What is the definition of a combination fitting
combination fittings reduce the number of fittings to use.
3. How do you determine the degree of a bend write the formula below with an example.
2-12 inches from the obstructions.
4.What type of fitting allows you to put 2 different types of pipes together
an adapter.
5.What is the minimum pipe diameter before manholes are required.
8 inches
6. Define the following:
Building sewer- it is the drainage of waste that runs from the buildings foundation to the sewer main or septic tank
Building drain- main horizontal pipe inside building
Soil stack- a soil stack vents out the harmful gases out your roof
Title: DWV 2
Posted: 09/17/2012 10:36 AM
Category: Plumbing
Description:
Read pages 15.14-15.25 sections 7.00-13.00 and answer the following questions.
1. What is the definition of a fitting
a fitting is a device to connect a pipe(7.0.0)
2.What is the definition of a combination fitting
connects branch lines that intersect as at 90 degrees (7.3.5)
3. How do you determine the degree of a bend write the formula below with an example.
multiply the bend angle by 360 then multiply the answer by 360; (¼ x 360 = 0.025) 0.025 x 360 = 90 degrees
4.What type of fitting allows you to put 2 different types of pipes together
addaptor
5.What is the minimum pipe diameter before manholes are required.
8 inches
6. Define the following:
Building sewer; drain system that extends from the building to the public sewer
Building drain; main horizontal pipe in the building for sewage disposal
Soil stack; a vertical pipe that receives the discharge from a water closet
Fittings are devices used to connect pipe.
2.What is the definition of a combination fitting
Combination Fittings reduce the number of fittings needed
3. How do you determine the degree of a bend write the formula below with an example.
You determine the degree of the bend by this formula 360(1/4x360=0.025) then multiply that answer by 360 to determine the number of degrees in a ¼ inch bend
4.What type of fitting allows you to put 2 different types of pipes together
Adaptors allow two different types to join together
5.What is the minimum pipe diameter before manholes are required.
8 inches or longer in diameter before manholes
6. Define the following:
Building sewer Drainage piping that runs from the buildings foundation to the sewer main or septic tank
Building drain The main horizontal pipe inside the building it carries all sewage and other liquid fluids to a building sewer
Soil stack A vertical section of pipe that receives the discharge of water closets
1. What is the definition of a fitting
Device used to connect pipe. Section: 15.14
2.What is the definition of a combination fitting
Reduces the number of fittings needed. Section: 15.19
3. How do you determine the degree of a bend write the formula below with an example.
Multiply the bend fraction by 360 twice. (¼ x 360)360 = 90
Section: 15.15
4.What type of fitting allows you to put 2 different types of pipes together
Adapters Section: 15.16
5.What is the minimum pipe diameter before manholes are required.
Eight inches or wider. Section: 15.22
6. Define the following:
Building sewer-The drainage piping that runs from the building's foundation to the sewer main. Section: 15.22
Building drain-Main horizontal pipe inside a building that carries all sewage and other liquid wastes to the building sewer.
Section: 15.22
Soil stack-A vertical section of pipe that receives the discharge of water closets, with or without the discharge from other fixtures.
Section: 15.22
1. What is the definition of a fitting
it is a device used to connect pipe. 15.14
2. What is the definition of a combination fitting
is a fitting that combines a wye and a 1/8 bend 15.18
Multiply the bend fraction by 360 degrees twice. Example angle of a ¼ bend, multiply the bend type1/4) by 360 (1/4 x 360 = 0.025). 15.15
4. What type of fitting allows you to put 2 different types of pipes together
adapters 15.17
5.What is the minimum pipe diameter before manholes are required.
8 inches or larger in diameter 15.22
6. Define the following:
Building sewer-part of drainage system which extends from the end of the buildings drain and conveys it’s discharged to a public sewer.
Building drain-That part of the lowest piping
Soil stack-A soil stack is the part of a plumbing system that connects interior plumbing to the sewer and vents gases out of a building of a drainage system that receives the discharge from soil, waste, and other drainage pipes inside the walls of the building and conveys it to the building sewer
3. How do you determine the degree of a bend write the formula below with an example.
multiply the bend by 360 degrees twice. example angle of a ¼ multiply the bend type ¼ by 360(1/4 x 360=0.025) then multiply it by 360 again. 15.5
4.What type of fitting allows you to put 2 different types of pipes together
Adapters 15.17
5.What is the minimum pipe diameter before manholes are required.
the piping diameter must be 8 inches or larger in diameter. 15.22
6. Define the following:
Building sewer-
Soil stack-
1. What is the definition of a fitting
Fittings are devices used to connect two different pipes
2.What is the definition of a combination fitting
Holds multiple fittings
3.How do you determine the degree of a bend write the formula below with an example.
360(1/4 X 360 = 0.025)
4.What type of fitting allows you to put 2 different types of pipes together
Male and Female adapters
5.What is the minimum pipe diameter before manholes are required
8 inches or larger
6. Define the following:
Building sewer: the drainage piping from the building to sewer/septic
Building drain: the main horizontal pipe that carries sewage to the sewer
Soil stack: the pipe that takes all the waste water from the upstairs plumbing system of a building
Fittings are devices to connect pipes.
2.What is the definition of a combination fitting
can hold multiple fittings
3. How do you determine the degree of a bend write the formula below with an example.
360( x360=.025)
4.What type of fitting allows you to put 2 different types of pipes together
female and male adapters
5.What is the minimum pipe diameter before manholes are required.
8 inches
6. Define the following:
Building sewer part of the drainage system extends from building to discharge at public sewer
Building drain lowest piping that receives the discharge
Soil stackpipe extending from house into which branches empty
Fittings are devices to connect pipes.
2.What is the definition of a combination fitting
can hold multiple fittings
3. How do you determine the degree of a bend write the formula below with an example.
360( x360=.025)
4.What type of fitting allows you to put 2 different types of pipes together
double side inlets
5.What is the minimum pipe diameter before manholes are required.
8 inches
6. Define the following:
Building sewer part of the drainage system extends from building to discharge at public sewer
Building drain lowest piping that receives the discharge
Soil stackpipe extending from house into which branches empty
1. What is the definition of a fitting
Fittings are devices that are used to connect pipe.
2. What is the definition of a combination fitting
Reduce the number of fittings needed.
3. How do you determine the degree of a bend write the formula below with an example?
Determining the number of degrees a given bend turns by multiplying the bend fraction by 360 degrees twice.
4. What type of fitting allows you to put 2 different types of pipes together
Sanitary fittings
5.What is the minimum pipe diameter before manholes are required.
8 inches or larger in diameter.
6. Define the following:
Building sewer the drainage system that runs from the buildings foundation to the sewer main or septic tank.
Building drain the main horizontal pipe inside a building.
Soil stack is vertical section of pipe that receives the discharge of water closets, with or without the discharge from other fixtures.
1. What is the definition of a fitting
They are devices used connect pipes together
2.What is the definition of a combination fitting
reduce the number of fittings needed.
3. How do you determine the degree of a bend write the formula below with an example.
For example, to determine the bend angle of a bend ¼ bend, multiply the bend type (1/4) by 360(1/4 X 360 = 0.025). Next multiply that answer by 360 to determine the number of degrees in a ¼ a bend (0.025 X 360 = 90).
4.What type of fitting allows you to put 2 different types of pipes together
Sanitary fittings
5.What is the minimum pipe diameter before manholes are required.
8” or larger
6. Define the following:
Building sewer- piping that runs from the buildings foundation to the sewer main or septic tank
Building drain- the main horizontal pipe inside a building
Soil stack- a vertical stack section that receives the discharge of water closets, with or without the discharge from other fixtures.
1. What is the definition of a fitting
divices used to connect pipes
7.0.0 fittings and there applications
2.What is the definition of a combination fitting
a fitting that combines a wye and a 1/8 bend
7.3.5 wyes
3. How do you determine the degree of a bend write the formula below with an example.
multiplying the bend fraction bt 360 degrees twice 360(1/4X360=0.025) then (0.025X360=90)
7.3.1 bends
4.What type of fitting allows you to put 2 different types of pipes together
sanitary fittings
7.3.0
5.What is the minimum pipe diameter before manholes are required.
1. What is the definition of a fitting
fittings are devices used to connect pipe.(7.1.0)
2.What is the definition of a combination fitting
A combination fitting used to connect Dwv to the main systems(7.3.0)
3. How do you determine the degree of a bend write the formula below with an example.
1/4x360=0.025 (7.3.1)
4.What type of fitting allows you to put 2 different types of pipes together
Adaptors (7.3.2)
5.What is the minimum pipe diameter before manholes are required.
8 (10.0.0)
6. Define the following:
Building sewer : The drainage piping that runs from the buildings foundation to the septic tank(10.0.0)
Building drain: Main horizontal pipe inside a building that caries all suage to sewer.(9.0.0)
Soil stack:
Name: Hansel’s Building Trades Blog
|
|
|
||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Title: DWV 2
Posted: 09/17/2012 10:36 AM
Category: Plumbing
Description:
Read pages 15.14-15.25 sections 7.00-13.00 and answer the following questions.
1. What is the definition of a fitting
Devices used to connect pipes sec. 7
2.What is the definition of a combination fitting
Multiple fittings put together.
3. How do you determine the degree of a bend write the formula below with an example? (1/4 x 360)=0.025 x 360= 90 sec. 7.3.1
4. What type of fitting allows you to put 2 different types of pipes together
An adaptor
5.What is the minimum pipe diameter before manholes are required.
8 inches sec. 10
6. Define the following:
Building sewer-is the piping that runs from the house to the septic tank.
Building drain- main horizontal pipe inside a building
Soil stack- vents gases out of a building
1. What is the definition of a fitting
devices used to connect pipes
2.What is the definition of a combination fitting
connect DWV branches to the main DWV system
3. How do you determine the degree of a bend write the formula below with an example.
¼ bend 360(1/4*30=0.025)
4.What type of fitting allows you to put 2 different types of pipes together
adapters
5.What is the minimum pipe diameter before manholes are required.
7 inches
6. Define the following:
Building sewer: drainage piping that runs from the buildings foundation to the sewer main or septic tank
Building drain: main horizontal pipe in a side building
Soil stack: the pipe that takes all the waste water from the upstairs plumbing system of a building.